Waler End Bearer
Steel End Bearers are used to provide support at the end on the Waler Rails when it is not possible to safely batter the ends of the trench to ground level. They are manufactured in several sizes to match the selection of Rams.
The End Bearers are supplied with a securing pin (Part No. MT-B0023) and an ‘R’ clip (Part No. MT-H0030). An overextension mechanism is employed to prevent the inner section from being extended beyond its safe limit. The simple telescopic construction is from two box sections: the outer sleeve made from 100x100x4 SHS – S355 and the inner sleeve made from 90x90x5 SHS – S355.
All End Bearers for ram types B and C have carrying handles. These MUST NOT be used for lifting the assembled frame; they are solely to be used for carrying the End Bearer. The securing pin is to ensure safe handling of the End Bearer when being transported and MUST be removed when assembled with the waler rails; otherwise, when pumping out the rams, the pin can become under load and prevent the rams from achieving the desired loading on the trench sheets.
These are available from stock at our Dunboyne Depot for Hire or Sale, pricing on request.
TECHNICAL INFORMATION
| Part No. | For Ram Type | Range | Weight |
|---|---|---|---|
| MT-B0020 | A | 530mm to 860mm | 13.5kg |
| MT-B0021 | B | 780mm to 1310mm | 20.0kg |
| MT-B0037 | B1 | 1175mm to 1705mm | 25.0kg |
| MT-B0022 | C | 1260mm to 2010mm | 30.5kg |
| MT-B0030 | B1N | 1295mm to 1825mm | 29.0kg |
| MT-B0026 | B2 | 1500mm to 2030mm | 31.5kg |
| MT-B0028 | B3 | 1700mm to 2230mm | 32.5kg |
| MT-B0031 | B2N | 1795mm to 2325mm | 26.5kg |
| MT-B0032 | C1 | 1960mm to 2710mm | 39.0kg |
| MT-B0033 | C2 | 2650mm to 3400mm | 47.5kg |
MAKE A HIRE ENQUIRY
Please submit an enquiry below. One of our team will contact you to discuss your requirements.
Please note: You must have an account with Westport Equipment to hire this equipment.
* = required fields
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
